Coils by Scott Handmade Prebuilt Coils

Coils by Scott Handmade Prebuilt Coils are hand-wound in the UK for rebuilders who want exotic, high-performance wire without spending an evening at the bench. Each set is cleaned ultrasonically before it leaves the workshop, so it is ready to fit.

Compatibility

These are loose prebuilt coils for your own RDA or RTA deck, not atomiser heads. They suit most rebuildable atomisers with room for a 3mm inner diameter coil. See the rest of our pre-wrapped coils.

Specifications

• 4 Core Aliens 0.12 ohm: 0.12 ohm in a dual coil build, 0.24 ohm as a single; four strands of 28G alien wrapped in 36G; 5 wraps; 3mm inner diameter; Ni80
• Alien Clapton 0.14 ohm: 0.14 ohm in a dual coil build, 0.28 ohm as a single; three strands of 28G alien wrapped in 36G; 5 wraps; 3mm inner diameter; Ni80
• Handmade in the UK
• Ultrasonically cleaned

Which Build?

The 4 Core Aliens pack more wire into each wrap for a slightly lower resistance and a dense, warm vape. The Alien Clapton sits a little higher and ramps up quickly. Both are low resistance builds, so only use them on a regulated mod with a suitable battery and a deck you know how to set up.

Fitting Tips

Install the coils, check the resistance on your mod, then pulse them gently to even out any hot spots before wicking.

Pick your build and upgrade your rebuildable with vape coils made by hand.