OXVA Xlim Go 2 Pod Kit

The OXVA Xlim Go 2 Pod Kit is the step up from the original Go: a bigger 1500mAh cell, faster charging and a smoother airflow slider, with the same fuss free operation. There is nothing to set up, because Smart Mode reads the pod and picks the power.

Features

• Refillable pod kit for MTL and RDTL vaping
• 1500mAh built-in battery
• 5W to 30W output, set automatically by Smart Mode
• Automatic draw activation
• Side airflow slider
• Three colour battery indicator
• UniTech 2.0 coil platform
• Fast 2A charging over USB Type-C
• 2ml top fill pod, supplied at 0.8 ohm
• Takes the OXVA Xlim pod and Xlim EZ ranges

Battery and Charging

1500mAh is generous for a kit this slim and will take most mouth to lung vapers through a full day without a top up. The three colour indicator splits the charge into clear bands instead of a single light that only warns you once it is nearly gone.

Type-C charging runs at 2A, so a flat device is usable again quickly rather than being off the table for an hour.

Smart Mode and Airflow

Fit a pod and the device recognises the resistance and applies a matching wattage from the 5W to 30W range. A 0.8 ohm pod lands on a tight, cigarette like draw, while a lower resistance Xlim pod opens it into a warmer restricted lung vape.

The airflow slider sits on the side and moves without steps, so the draw can be set exactly where you want it and left there.

E-Liquid Compatibility

Use 10ml nic salts or 50/50 e-liquids. Thick high VG shortfills will not wick properly through a 2ml Xlim pod.

In the Box

• Xlim Go 2 device
• 2ml pod at 0.8 ohm
• User manual

Eight finishes are listed: Black Carbon, Black Shadow, Blue Ripple, Green Ripple, Light Brown Shadow, Metal Blue, Metal Silver and Pink Ripple. The original OXVA Xlim Go is still in the OXVA range if you want the smaller battery.